Part Number Hot Search : 
71308 30KP100A 8L08A 9LV16 GPZ20 ISL95808 SMS130 L79XXC08
Product Description
Full Text Search
 

To Download D63696475024 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Display Receiver with Limit Outputs Type D 6369 6475
* * * * * * *
Du line
(R)
Fieldbus
Installationbus
4-digit 7-segment LED-display with sign Freely scaleable 2 relay limit outputs (HI, LO) 2 NPN transistor limit outputs (HIHI, LOLO) LED-indication for all limit outputs Automatic or manual reset of limit outputs Protocol selectable (3 1/2-digit BCD, 4-digit BCD, 8 bit binary) * Multiplex or normal mode * Internal or external selection of multiplex address * AC power supply
Product Description
Freely scaleable Dupline(R) 4 digit LED-display with sign, for panel mounting. Readout of analog signals, counter values or time. 4 limit outputs with LED-indication. Protocol selectable (3 1/2 digit BCD, 4-digit BCD, 8 bit binary)
Ordering Key
Type: Dupline(R) Type no. Supply
D 6369 6475 024
Type Selection
Supply Ordering no. 8/16 channels 4-digit LED D 6369 6475 024 D 6369 6475 230
24 VAC 115/230 VAC No code module required
Input/Output Specifications
Inputs Limit output reset Multiplex address selection Open loop voltage Short circuit current Contact resistance Cable length Dielectric voltage Inputs - Dupline(R) Inputs - Relay outputs Inputs - Transistor outputs HI, LO - limit outputs Isolated in groups of Contact ratings (AgCd0) Resistive load AC1 DC1 or Inductive loads AC15 DC13 Mechanical life Electrical life (max. load)AC1 Operating frequency Dielectric voltage Outputs - Dupline(R) Outputs - transistor outputs 1 contact or NPN transistor 4 contacts or NPN transistors 5 VDC 50 A 10 2m 500 VAC (rms) 4 kVAC (rms) 4 kVAC (rms) 2 SPST relays 2x1 (micro gap) 5 A/250 VAC (1100VA) 0.25 A/250 VDC (62 W) 5 A/25 VDC (125 W) 2.5 A/230 VAC 5 A/24 VDC 30 x 106 operations 2.5 x 105 operations 7200 operations/h 4kVAC (rms) 4kVAC (rms) Display Display format Display range Display type Height of digits Display colour Change of sign (automatic) Decimal point Scaling feature Multiplex feature Display test Transmission protocol Limit values Settings Channel address Multiplex address (internal) Scaling Decimal point position Limit values Normal/multiplex mode Enable/disable limit outputs Transmission protocol Internal/external selection of multiplex address Automatic/manual reset of limit outputs 7-segment -9999 to +9999 (4 digits) LED 14.2 mm Red Yes Configurable by keys Yes Yes Yes 3 1/2, 4-digit BCD, 8 bit binary 4 (HIHI, HI, LO, LOLO) Keys and display Keys and display Keys and display Keys and display Keys and display Keys and display Keys and display 2 DIP switches 1 DIP switch 1 DIP switch
Specifications are subject to change without notice (12.10.05) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group
1
D 6369 6475
Du line
(R)
Fieldbus
Installationbus
Supply Specifications
Power supply Rated oprational voltage Overvoltage cat. III (IEC 60664) 230 024 115 and 230 VAC 15% 24 VAC 15% 45 to 65 Hz 4.5 ms Typ. 8 VA 4 kV 800 V 4 kVAC (rms) 4 kVAC (rms) 4 kVAC (rms) 4 kVAC (rms)
Display Specifications
HIHI, LOLO limit outputs Watchdog-output Isolated in groups of Output voltage range VBB Reverse-polarity protection Current per output Total load capability Short-circuit protection Built-in protective diodes Off-state leakage current Output voltage drop Dielectric voltage Outputs-Dupline(R) Response time Multiplex input Reset inputs Limit outputs Watchdog output 2 NPN transistors 1 NPN transistor 1x3 6-60 VDC None 250 mA 100% None None 500 A 2.5 V 4 kVAC (rms) 1 pulse train 1 pulse train 1 pulse train 1 pulse train
Frequency Dropout tolerance Rated operational power Rated operational withstand voltage 230 024 Dielectric voltage Supply - Dupline(R) Supply - Inputs Supply - Relay outputs Supply - Transistor outputs
General Specifications
Power ON delay Indication for HIHI limit output HI limit output LO limit output LOLO limit output Environment Degree of protection Pollution degree Operating temperature Storage temperature Humidity (non-condensing) Mechanical resistance Shock Vibration Material Weight Approvals 3s LED, red LED, yellow LED, yelow LED, red IP 20 3 (IEC 60664) 0 to +60C (+32 to +140F) -25 to +85C (-13 to +185F) 0 to 80% 15 g (11 ms) 2 g (6-55 Hz) Glass-reinforced Noryl 460 g UL, CSA
Mode of Operation
4-digit 7-segment LED display used to monitor analog signals, counter values or time of the day. The display value is freely scaleable within the range -9999 to +9999 with selectable position of the decimal point. Values from 3 1/2-digit BCD, 4-digit BCD and 8-bit binary transmitters can be displayed, since the transmission protocol is selectable. 4 limit outputs are available: HI, LO HIHI, LOLO -relay outputs -NPN transistor outputs Each output can be allocated freely to any scaled display value. The limit outputs turn on whenever the value controlling the outputs is equal or above the limit value setting for HI and HIHI (equal or below for LO and LOLO). It is selectable whether the limit outputs shall be reset automatically (by the value controlling the limit outputs returning to normal) or manually by activation of the "Limit Reset" - input. The limit outputs may also be disabled if this feature is not required. 4 LEDs at the front also indicate the signal level compared to the 4 limit settings, blinking upon limit alarm, steady state after a manual reset. The display can be used in normal mode as well as in multiplex mode (3 1/2digit BCD protocol only). When used in multiplex mode, the multiplex address for the display may be selected by a selector switch (e.g. on the cabinet door) that connects to the "Multiplex Address" inputs. Each of the display values from the 16 multiplex addresses can be scaled individually. The limit value setting however will always refer to the multiplex address defined during the configuration. With the 4 keys at the front the display shifts to program mode, in which scaling, decimal point position, limit value settings, channel address, multiplex address etc. is configured. For further information please refer to the "User Manual" delivered with the unit.
2
Specifications are subject to change without notice (12.10.05) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group
D 6369 6475
Du line
(R)
Fieldbus
Installationbus
Multiplex Address Selection Inputs
Multiplex address MSB 0 1 2 3 4 5 6 7 8 9 a b c d e f 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 Multiplex address input terminals LSB 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
Settings
Programming keys
DIP-switch for function selection
Functional Description
Power Supply Reset Input Multiplex Input for readout Dupline(R) / Dupline(R) Signal
Dimensions (mm)
Common Watch Dog HiHi Output LoLo Output
Panel cut-out
Lo Output Hi Output Power supply
Panel thickness
Wiring Diagrams
Specifications are subject to change without notice (12.10.05) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group
3


▲Up To Search▲   

 
Price & Availability of D63696475024

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X